Canon LV-7565 Serial Functional Specification - Page 26

Expand Serial Command Specification Page 25 of 46 8.7.5. CF_KEYSTONE Command Command "CF_KEYSTONE_%1" [CR] "UP" --------- Make the screen image length at the top edge shorter with a small range. "FUP" ------- Make the screen image length at the top edge shorter with a large range. "DN" -------- Make the screen image length at the bottom edge shorter with a small range. "FDN" ------ Make the screen image length at the bottom edge shorter with a large range. %1 "LEFT" ----- Make the screen image length at the left edge shorter with a small range. "FLEFT" --- Make the screen image length at the left edge shorter with a large range. "RIGHT" --- Make the screen image length at the right edge shorter with a small range. "FRGT" ---- Make the screen image length at the right edge shorter with a large range. "RST" ------- Keystone off Details Change Keystone range. (Only valid when it is in the usual Power On state) When the range is over the maximum, a Projector accepts the Command, but it does not execute. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.7.6. CF_KYSTNMODE Command Command "CF_KYSTNMODE_%1" [CR] %1 "STR Set Keystone store mode to Store "RST Set Keystone store mode to Reset Details Set Keystone store mode. (Only valid when it is in the usual Power On state) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.7.7. CF_ ANAMORPHIC Command Command "CF_ANAMORPHIC_%1" [CR] %1 "ON Set Anamorphic to On "OFF" --------- Set Anamorphic to Off Details Set Anamorphic On / Off. (Only valid when it is in the usual Power On state) When Anamorphic set to On, the screen will be 4:3 even if it is HDTV. When Anamorphic set to Off, HDTV will be 16:9. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR]