Canon LV-7565 Serial Functional Specification - Page 28
Lamp Series Command, 8.1. CF_LAMPH Command, 8.2. CF_LAMPMODE Command, 9. Sound Series Command, 9.
View all Canon LV-7565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Expand Serial Command Specification Page 27 of 46 8.8. Lamp Series Command 8.8.1. CF_LAMPH Command Command "CF_LAMPH_%1" [CR] %1 "RST" Details Reset total Lamp running time. (Only valid when it is in the usual Power On state) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.8.2. CF_LAMPMODE Command Command "CF_LAMPMODE_%1" [CR] "NORMAL" -------- Set Lamp mode to Normal %1 "ECO Set Lamp mode to Silent "AUTO Set Lamp mode to Auto Details Set Lamp mode. (Only valid when it is in the usual Power On state) The value set by this Command is stored in EEEPROM. When All Off the Projector, the setting will valid. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9. Sound Series Command 8.9.1. CF_VOLUME Command Command "CF_VOLUME_%1" [CR] "000 ~ 063 Directly set Volume value %1 "UP Volume setting value +1 "DN Volume setting value -1 Details Control Volume setting value. (Only valid when it is in the usual Power On state.) The same operation as a Remote control's turning up/down the volume. Also, the Command directly sets the volume value. When setting volume value like Remote control unit operation, Sound Mute On will be canceled. The setting value will be stored in a Projector. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.2. CF_MUTE Command Command "CF_MUTE_%1" [CR] %1 "ON" ------- Set Sound Mute to On "OFF" ------ Set Sound Mute to Off Details Control Sound Mute On / Off. (Only valid when it is in the usual Power On state) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR]