Canon LV-7565 Serial Functional Specification - Page 20
CF_CLAMP Command, 5.4. CF_H-POS Command, 5.5. CF_V-POS Command
View all Canon LV-7565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Expand Serial Command Specification Page 19 of 46 8.5.3. CF_CLAMP Command Command "CF_CLAMP_%1" [CR] "0000 ~ 0127 Directly set Clamp value %1 "UP Clamp setting value +1 "DN Clamp setting value -1 Details Set Clamp. (Only valid when it is in the usual Power On state) The value set by this Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (Stand by mode stays) Note: When %1 is directly specified, this command is not enough to execute for the screen. To show up on the image, issue CF_SETPCADJ Command. Acceptable Response "000" [CR] Unacceptable "101" [CR] ---- When Input is Video series 8.5.4. CF_H-POS Command Command "CF_H-POS_%1" [CR] "0000 ~ nnnn" --------- Directly set Horizontal Position "nnnn" means maximum value. This result of current Total %1 Dots - Display Dots. "UP Horizontal Position setting value +1 "DN Horizontal Position setting value -1 Details Set Horizontal Position. (Only valid when it is in the usual Power On state) The value set by this Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (Stand by mode stays) Note: When %1 is directly specified, this command is not enough to execute for the screen. To show up on the image, issue CF_SETPCADJ Command. Acceptable Response "000" [CR] Unacceptable "101" [CR] ---- When Input is Video series 8.5.5. CF_V-POS Command Command "CF_V-POS_%1" [CR] "0000 ~ nnnn" --------- Directly set Vertical Position "nnnn" means maximum value. This result of current Total %1 Line - Display Line. "UP Vertical Position setting value +1 "DN Vertical Position setting value -1 Details Set Vertical Position. (Only valid when it is in the usual Power On state) The value set by this Command will not be saved to the Projector. Therefore, when All Off the Projector, the value will return to the original setting. (Stand by mode stays) Note: When %1 is directly specified, this command is not enough to execute for the screen. To show up on the image, issue CF_SETPCADJ Command. Acceptable Response "000" [CR] Unacceptable "101" [CR] ---- When Input is Video series