Canon PIXMA MP495 Manual - Page 5
USB Port, Power Cord Connector - wireless setup
UPC - 660685024540
View all Canon PIXMA MP495 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Main Components Page 5 of 759 pages (7) Platen Glass Load an original to copy or scan. (8) Wi-Fi lamp Lights or flashes blue to indicate the wireless LAN status. Lights: Wireless LAN connection is enabled. Flashes: Printing or scanning over wireless LAN. Also flashes while searching for wireless LAN access point during setup and when connecting to the access point. (9) Operation Panel Use to change the settings of the machine or to operate it. See Operation Panel . Note The LED and lamps on the Operation Panel other than the POWER lamp will go out if the machine is not operated for about 5 minutes. To restore them, press any button except the ON button or perform the print operation. Rear View (10) USB Port Plug in the USB cable to connect the machine with a computer. Important Do not touch the metal casing. Do not plug in or unplug the USB cable while the machine is printing or scanning originals with the computer. (11) Power Cord Connector Plug in the supplied power cord.