Canon PIXMA MP495 Manual - Page 617

An Error Code Is Displayed on the LED Page 617 of 759 pages (LED display) Make sure the Platen Glass and the print head alignment sheet are not dirty. Make sure the type and size of loaded paper is suitable for Automatic Print Head Alignment. For Automatic Print Head Alignment, always load one sheet of A4 or letter-sized plain paper. Make sure if Print Head nozzles are clogged. Print the nozzle check pattern to check the status of the Print Head. Routine Maintenance If the error is not resolved, connect the machine to the computer and align the Print Head on the printer driver. Aligning the Print Head Position POWER Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately When the POWER and Alarm lamps flash alternately as shown below, and the error code as follows is displayed on the LED, an error requiring servicing might have occurred. P, 0, 2 Error Code (LED display) P, 1, 0 Action Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE Cartridge Holder from moving, and turn on the machine again. Important Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it. If the problem is not resolved, contact the service center. Turn off the machine, and unplug the power cord of the machine from the power supply. Contact the service center.