Canon PIXMA MP495 Manual - Page 731
Printing Out Network Setting Information - wps button
UPC - 660685024540
View all Canon PIXMA MP495 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 731 highlights
Printing Out Network Setting Information Page 731 of 759 pages Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Printing Out Network Setting Information N022 Printing Out Network Setting Information You can print out the network settings of the machine such as its IP address and SSID. Important This print out contains valuable information about your computer. Handle it with care. 1. Make sure that the machine is turned on. 2. Load a sheet of A4 or Letter-sized plain paper in the Rear Tray. 3. Press the Maintenance button repeatedly until the LED displays as follows. 4. Press the Color button or the Black button. The machine starts printing the network setting information. The following information on the machine's network setting is printed out. Item Explanations of the item Setting Wireless LAN Wireless LAN Enable/Disable Link Status Status of the Wireless LAN Active/Inactive MAC Address MAC Address XX:XX:XX:XX:XX:XX SSID SSID SSID of the wireless LAN Connection Mode Connection Mode Infrastructure Channel Channel XX (1 to 13) Encryption Method of the Encryption none/WEP/TKIP/AES WEP Key Length WEP Key Length Inactive/128/64 Authentication Method of the Authentication none/auto/open/shared/WPA-PSK/WPA2PSK Signal Strength Signal Strength 0 to 100 [%] TCP/IP Version TCP/IP Version IPv4/IPv6 IP Address Selected IP Address XXX.XXX.XXX.XXX Default Gateway Default Gateway XXX.XXX.XXX.XXX Subnet Mask*1 Subnet Mask XXX.XXX.XXX.XXX Subnet Prefix Subnet Prefix Length XXX Length*2 IPsec*3 IPsec setting Active Security Protocol*3 Method of the Security Protocol ESP/ESP & AH/AH WPS PIN CODE WPS PIN CODE XXXXXXXX (Up to 8 characters) Printer Name Printer name Printer name (Up to 15 characters) WSD WSD setting Enable/Disable WSD Timeout Timeout 1/5/10/15/20 [min] LLTD LLTD setting Enable/Disable