Canon PIXMA MP495 Manual - Page 616

An Error Code Is Displayed on the LED Page 616 of 759 pages E, 1, 6 (LED display) E, 2, 0 E, 2, 1 E, 2, 2 E, 2, 3 E, 2, 4 The ink has run out. The ink has run out. Replace the ink cartridge and close the Scanning Unit (Cover). If printing is in progress and you want to continue printing, press the machine's Stop (Reset) button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition. The function for detecting the remaining ink level will be disabled. Replace the empty ink cartridge immediately after the printing. The resulting print quality is not satisfactory, if printing is continued under the ink out condition. An error regarding network has occurred. Refer to your setup manual or the Network Setup Troubleshooting and take the appropriate action. (LED display) E, 3, 0 (LED display) E, 3, 1 The size of the original cannot be correctly detected or the document is too small when the Fit-toPage copying is selected. Make sure that the original meets the requirements and is correctly loaded on the Platen Glass. Check the position and direction of the original loaded on the Platen Glass. The machine is not connected with the computer. Connect the machine and the computer with a USB cable or over a wireless LAN. (LED display) E, 5, 0 Scanning the print head alignment sheet has failed. Press the Stop/Reset button to dismiss the error, then take the actions described below. Make sure that the print head alignment sheet is set in the correct position and orientation on the Platen Glass.