Canon PIXMA MP495 Manual - Page 729

Initializing the Network Settings of the Machine Page 729 of 759 pages Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Initializing the Network Settings of the Machine N019 Initializing the Network Settings of the Machine Important Note that initialization erases all network settings on the machine, and printing or scanning operation from a computer over network may become impossible. To use the machine over network, refer to the setup manual of the machine to set up the machine again. 1. Start up the Canon IJ Network Tool. Starting up Canon IJ Network Tool 2. Select the printer in Printers. 3. Select Maintenance from the Settings menu. 1. Setting Initialization Initialize Reverts all the network settings of the printer to factory default. Click Initialize to display the Initialize Settings dialog box and click Yes to initialize the network settings of the printer. Do not turn off the printer during initialization. Click OK when initialization is complete. Performing initialization when connected over wireless LAN will break the connection, so refer to your setup manual of the machine to set up the machine again. Note You can change the network settings of the printer using Canon IJ Network Tool with USB connection after initializing the LAN settings. To change the network settings using Canon IJ Network Tool, activate Wireless LAN in advance. Follow the procedure below to activate Wireless LAN. 1. Press the Maintenance button repeatedly until the LED displays as follows. 2. Press the Color button. Page top