Canon PIXMA MP495 Manual - Page 723

Changing the Settings in the Wireless LAN Sheet WEP Details dialog box Page 723 of 759 pages Specify the printer WEP settings. When changing the password (WEP key), the same change must be made to the password (WEP key) of the access point. 1. WEP Key Enter the same key as the one set to the access point. The number of characters and character type that can be entered differ depending on the key length and key format. Key Length 64 bit 128 bit Key Format ASCII 5 characters 13 characters Hexadecimal (Hex) 10 digits 26 digits 2. Key Length Select either 64 bit or 128 bit. 3. Key Format Select either ASCII or Hex. 4. Key ID Select the Key ID (index) set to the access point. 5. Authentication Select the authentication method to authenticate the printer's access to the access point. Normally, select Auto. If you want to specify the method manually, select Open System or Shared Key according to the setting of the access point. Important If the printer cannot communicate with the computer after the encryption type of the printer was switched, make sure that encryption types for the computer and the access point matches that set to the printer. How to Set a WEP/WPA/WPA2 Key Page top