Canon PIXMA MP495 Manual - Page 716

Canon IJ Network Tool Dialog Box Page 716 of 759 pages Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Canon IJ Network Tool Dialog Box N011 Canon IJ Network Tool Dialog Box This section describes the items displayed on the Canon IJ Network Tool dialog box. Important To use the machine over LAN, make sure you have the equipment necessary for the connection type, such as an access point. 1. Printers The printer name, status, printer model name, and port name are displayed. A check mark next to the printer in the Name list indicates it is set as the default printer. Configuration changes are applied to the selected printer. 2. Update Performs printer detection again. Click this button if the target printer is not displayed. Important To change the printer's network settings using the Canon IJ Network Tool, it must be connected via a LAN. If No Driver is displayed for the name, associate the port with the printer. Canon IJ Network Tool Menus If Not Found is displayed for the status, make sure that the access point is turned on. If the printer on a network is not detected, make sure that the printer is turned on, then click Update. It may take several minutes to detect printers. If the printer is not yet detected, connect the machine and the computer with a USB cable, then click Update. If the printer is being used from another computer, a dialog box is displayed informing you of this condition. Note This item has the same function as Refresh in the View menu. 3. Configuration Click to configure settings of the selected printer. Note