Canon REALiS WX450ST Pro AV User Manual - Page 111

Customizing System Operation (System Settings) Specifying Direct Power-On > [System settings] > [Direct power on] HDMI Digital PC Component Analog PC LAN USB You can turn on the projector by connecting the power cable without pressing the POWER button. Specifying Silence or Operating Tones > [System settings] > [Beep] HDMI Digital PC Component Analog PC LAN USB You can select whether a beep sounds or not when you operate the projector. Operation Setting Functions from Menus Off You need to press the POWER button to turn on the projector. On You can turn on the projector by connecting the power cable only. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Off] is the factory default. Off Disables the beep. On Enables the beep. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [On]. • The beep will not sound if you mute the projector sound with the MUTE button on the remote control. • Before enabling direct power on, be sure to set [Auto power-off] to an option other than [Disabled]. Selecting [Disabled] will prevent you from using auto power-off. • After turning off the projector, wait at least 5 minutes before turning it on again. It may shorten the lamp life if you turn on the projector immediately after turning it off. 111