Canon REALiS WX450ST Pro AV User Manual - Page 172

Completing Projector Settings Specifying Standby Power Consumption > [Network settings] > [Network standby settings] Specify network function operating status in standby mode as follows. Viewing the IP Address > [Network settings] > [Detailed settings (wired)] > [IP address] View the projector's IP address as follows. Note that the information can only be displayed, not changed. To change the settings, access the DHCP or TCP/IP settings. Normal All network functions are available even in standby mode, including the web screen, control over the network, and PJLink. Lowpower All network functions are available even in standby mode. However, the projector may be less responsive than usual when some functions are initially used. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Low-power] is the factory default. • [Low-power] may delay access over the network for some functions. For faster access, select [Normal]. • Power consumption when [Network function (wired)] is [On] varies depending on whether [Network standby settings] is set to [Normal] or [Low-power]. 172