Canon REALiS WX450ST Pro AV User Manual - Page 175
Initializing Network Settings, Specifying PJLink Settings
View all Canon REALiS WX450ST Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Installation and Maintenance Connecting to a Network Initializing Network Settings > [Network settings] > [Detailed settings (wired)] > [Network setting initialization] You can initialize the projector network settings. Completing Projector Settings Specifying PJLink Settings > [Network settings] > [PJLink] You can turn the PJLink network function on or off. When the function is turned on, control is possible via the LAN using commands that meet PJLink standards. When [Network setting initialization] is selected, the window shown below appears. Select [Yes] then press the OK button. • The following items are initialized. - Settings used for web login, such as the network setting screen, user name, password, and other settings - Network password setting - Network function (wired) - Network standby settings - Register network password - PJLink - DHCP - IP address - Subnet mask - Gateway address - E-mail sender address - E-mail recipient address - Projector name - Location - AMX Device Discovery settings - Crestron RoomView settings Off Disables the PJLink function. On Enables the PJLink function. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [On] is the factory default. • This projector conforms to Class 1 as defined in the PJLink standards of the JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands that are defined by PJLink Class 1, and has been verified as conforming to the PJLink standard Class 1 definition. • For information about using PJLink, refer to "Setting PJLink [PJLink]" (P191). 175