Canon REALiS WX450ST Pro AV User Manual - Page 210

Installation To use the NMPJ function, you must install the NMPJ application. Instructions in this manual are for installation in a Windows 7 environment. System Requirements Application system requirements are as follows. CPU Memory HDD Monitor Core 2 Duo P8600, 2.4 GHz or higher (32- or 64-bit) 1 GB or more 32 GB or more 1024x768 min. resolution Cannot be installed on computers without a minimum resolution of 1024x768. Additionally, operation is not ensured if the resolution is switched to less than 1024x768 after installation. Operating System Windows XP Professional SP3 Windows Vista Business SP2 Windows 7(Home/Professional/Ultimate) SP1 * Windows XP and Vista compatibility is limited to 32-bit editions. * Both 32- and 64-bit editions of Windows 7 are supported. • Operation is not ensured in other operating systems or editions. • Menus are in English in all cases, except in Japanese and Simplified Chinese versions of the application. • Operation is not ensured in operating systems other than English, Japanese, or Simplified Chinese OSes. • Operation is not ensured in Windows 8. Network In TCP/IP network environments, projectors can be connected to computers via the following LAN connections. Wired LAN (1000BASE-T, 100BASE-TX) • Although the application also supports computer-projector communication over a router, operation is only ensured over one router hop. Additionally, to use Broadcast mode (P249) with projectors in other subnets, the router must support IPv4 multicast routing. Note that the router must be set up to route multicast addresses used by the application. • If you are using an Aero style in Windows, this message may be displayed: "Do you want to change the color scheme to improve performance?" 210