Canon REALiS WX450ST Pro AV User Manual - Page 57
Auto PC Adjustment, Performing the Auto PC Function, Adjusting the Image Size (WUX450/WX520)
View all Canon REALiS WX450ST Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Operation Projecting an Image Step 3 Adjust the Image Auto PC Adjustment If the image display is shifted or there is flickering of the screen when [Analog PC-1] or [Analog PC-2] is selected, press the AUTO PC button to adjust the projector to the optimal condition. The adjustment results will be stored. If the projector is used again with the same computer, when the input signal is selected the image will be projected automatically under the same conditions that were previously adjusted. ■ Performing the Auto PC Function Press the AUTO PC button to perform projector adjustment. Remote control Projector If the Auto PC adjustment is insufficient, perform the following operations. • Select the input signal that matches the resolution of the computer from [Input signal select]. (P88) • If adjustment is insufficient even when using the above operation, adjust [Total dots], [Tracking], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical pixels] in [Input signal settings]. (P89 - P91) • For the signal types supported by the projector, see the table on page 292. Adjusting the Image Size (WUX450/WX520) To adjust the image size, turn the lever on the projection lens. Change the projector installation position (P130) if your desired image is too large or too small to adjust it with the zoom function. 57