Canon REALiS WX450ST Pro AV User Manual - Page 190
Setting Projector Information [Projector info.], Configuration Screen
View all Canon REALiS WX450ST Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Completing Computer Settings SNMP Item Receive community Password Confirm password Explanation Select the SNMP function version. If OFF is selected, the SNMP function will be turned off and the other settings in this screen cannot be changed. Enter the community name which will receive projector information in 1-byte alphanumeric characters and symbols (1 - 15 characters). Enter the community settings password in 1-byte alphanumeric characters and symbols (8 - 15 characters). It can be set only when the SNMP version is V3. For confirmation, enter the same password as you entered in [Password]. Factory default setting OFF Setting Projector Information [Projector info.] From [Projector info.] in the settings screen, you can set the names and location names which are used to identify projectors when multiple projectors are installed on the network. For the setting procedure, refer to "Displaying the Network Configuration Screen" (P181). Item Projector name Location Explanation Enter the projector name in 1-byte alphanumeric characters and symbols (1 - 63 characters). Enter the projector installation location in 1-byte alphanumeric characters and symbols (0 - 63 characters). Factory default setting Canon Projector001 Some characters such as # cannot be used for [Projector name] and [Location]. 190