Canon REALiS WX450ST Pro AV User Manual - Page 160

Installation-Related Menu Settings Here, you can use the following settings in the edge blending menu. Off Does not blend overlapping areas. Adjust Displays the menu for blending overlapping areas. Left, Right, Top, Bottom Off Projects an image with no correction. Adjust Marker Off Hides the markers. On Displays markers showing the adjustable blending area, with one line indicating the start position (in red) and another, the end position (in green). Start position Moves the marker for the start position. Width Specifies the width between the start and end markers. Reset Resets the marker settings. Black level adjustment Adjusts the black level of non-overlapping image areas. (P162) Reset Resets any adjustments you have made. • If you have already completed edge blending settings, selecting [Adjust] will apply them. • To restore the default settings before adjustment, select [Reset]. 3 Select the position where the images overlap. When you are adjusting the left image, this area is along the right edge of the image. In the edge blending window, select [Right] > [Adjust]. Left image Right image Overlapping area 4 Set [Marker] to [On]. Marker lines are projected on the images. The red marker indicates the start position for adjustment, and the green marker, the end position. By default, the green and red markers are displayed in the same position, so only the red marker is visible. 160