Canon S110 PowerShot S110 Camera User Guide - Page 17

Preparing the Camera 15 Charging the Battery Pack Recharge the battery pack with battery charger CB-2LS or CB-2LSE the first time you use the camera or when the "Change the battery pack" message is displayed. Battery charger model names and types vary by region. CB-2LS Charging Indicator CB-2LSE Charging Indicator • Insert the battery pack all the way into the battery charger and plug the charger into an electrical outlet. • The charging indicator will glow orange while the battery pack is charging. It will change to a steady green when the charge is complete. • After charging, unplug the battery charger and remove the battery pack from it. • Since this is a lithium ion battery pack, you need not completely use or discharge it before recharging. • It takes approximately 130 minutes to fully charge the battery pack from a fully discharged state (based on standard Canon testing conditions). Please charge it at an ambient temperate ranging between 5 and 40 ºC (41 and 104 ºF). • Charge times may vary according to the ambient temperature and the charge state of the battery pack. • To protect and prolong the life of the battery pack, do not charge it for longer than 24 hours at a time.