Canon VB-M42 Network Video Recording Software RM Series Administrator s Manual - Page 81

Record on a Regular Basis (Repeating Weekly Schedules) Specify the Recording Mode Note 1 Select the check box next to the recording mode in the list that best suits the type of recording you require. For example, if you want continuously record for the entire duration of the recording schedule, select the check box next to [Continuous Recording]. • You can specify the priority of the events generated by sensor recording, motion detection recording, intelligent function recording and volume detection recording. For details, see p. 83 and p. 84. When two events occur simultaneously, the event with the higher priority takes precedence. • Only supports continuous recording mode. 2 Configure the recording mode settings in the recording settings area. Hint You can specify more than one recording mode at the same time. 5 For example, you can select motion detection recording and The settings are different for each recording mode. specify a frame rate that is higher than continuous recording. This • Continuous recording way, a high frame rate is used only when motion is detected. Records continuously for the specified recording period. For details, see "Continuous Recording Settings" (p. 82). Specify Advanced Settings Setting a Recording Schedule • Sensor recording Starts recording when there is a signal from a sensor connected to the camera. For details, see "Sensor Recording Settings" (p. 83). • Motion detection recording Starts recording when motion is detected. For details, see "Motion Detection Recording Settings" (p. 84). Advanced settings are available when the [Advanced] button is displayed in the recording settings area. For details, see "Configure the Advanced Recording Settings" (p. 88). Save the Recording Schedule • Intelligent function recording Starts recording when motion that meets the intelligent function detection criteria is detected. For details, see "Intelligent Function Recording Settings" (p. 87). • Volume detection recording Starts recording when the volume detection criteria are met. For details, see "Volume Detection Recording Settings" (p. 87). 1 Click [OK] to close the dialog box. The schedule that was set is displayed in the schedule area. The schedule becomes active as soon as it is displayed in the schedule area. Use intelligent function recording instead of motion detection recording. Intelligent function recording is not supported. Use motion detection recording. Volume detection recording is not supported. Intelligent function recording and motion detection recording using the camera are not supported. 81