Canon VB-M42 Network Video Recording Software RM Series Administrator s Manual - Page 93

„ Adjust the Focus [Focus] tab (1) (2) (3) (4) Record on a Regular Basis (Repeating Weekly Schedules) „ Configure External Outputs [External Outputs] tab (1) (2) 5 Setting a Recording Schedule (1) [Not Specified] Record using the existing focal position of the camera. (2) [Auto] and [Auto (for domes)] Automatically focus the video. Use [Auto (for domes)] for cameras equipped with an indoor dome housing. The setting prevents the camera from focusing onto the dome surface. (3) [Fixed at infinity] Fix the focal point at infinity. (4) [Manual] Adjust the focus manually by clicking the [Far] or [Near] button. Click [One Shot AF] to focus once on the current subject and then return to manual focus. Enable or disable output to external devices registered on the camera when the recording schedule starts. (1) [Not Specified] Disable the external output. (2) [On] Enable the external output. Note • You must first specify the external device settings on the camera. For details, see the camera manual. • The number of external outputs is different for different camera models. • The external outputs are enabled only during recording. Hint This feature can be used with sensor recording, motion detection recording, intelligent function recording or volume detection recording. For example, by connecting a buzzer to an external output and enabling the output for motion detection recording, the buzzer will sound when motion is detected. 93