Canon XF100 XF100 / XF105 Instruction Manual - Page 50
Autofocus Mode
View all Canon XF100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Adjusting the Focus Magnification Press the MAGN. button. • i appears on the bottom of the screen and the center of the screen is 50 magnified approximately 2 times*. • Press the button again to cancel the function. * The magnification that appears on the LCD screen and on the viewfinder screen is different. The magnification also differs based on the video configuration. NOTES • Magnification appears only on the camcorder screen. It will not appear on an external monitor connected to the camcorder. • Magnification will not affect your recordings. Autofocus Mode The camcorder uses the TTL autofocus system and continuously adjusts the focus on the subject in the center of the screen. The focusing range is 2 cm (0.8 in.; at full wide-angle, measured from the front of the lens barrel) to f. During autofocus mode, you can turn the manual ring to focus manually. When you stop turning the ring, the camcorder returns to autofocus mode. This is useful in situations such as when focusing on a subject on the other side of a window. Press the AF/MF button. • A appears on the bottom left of the screen. Setting the Autofocus Mode You can select how the camcorder focuses during autofocus mode. 1 Open the autofocus [Speed] submenu. [l Camera Setup] [AF Mode] [Speed] 2 Select the desired option and then press SET. [l Camera Setup] [AF Mode] [Speed] [Instant]