Canon XF100 XF100 / XF105 Instruction Manual - Page 91
Pre-recording Mode
View all Canon XF100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Special Recording Modes 3 Press the START/STOP button to begin recording. • The camcorder automatically records at the set frame rate. • The tally lamps illuminate. • [S&F STBY] changes to [N S&F REC] while recording. 91 4 Press the START/STOP button again to stop recording. • The camcorder records the clip. • The tally lamps go out and [S&F STBY] appears at the top of the screen. NOTES • You can use only one special recording mode at a time. In addition, slow & fast motion mode cannot be used with double slot recording. • While recording, you cannot change the shooting frame rate. • For lower shooting frame rates, it may take approximately 1 second to stop recording. • Slow & fast motion mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the video configuration. • The time code advances while video is recorded. If the running mode of the time code (0 70) is set to [Free Run] or the time code is input from an external source (b only), the running mode will switch to [Rec Run] during special recording mode. When special recording mode is deactivated, the running mode will return to its previous setting. • b During special recording mode, the time code signal will not be output from the GENLOCK/TC terminal or HD/SD SDI terminal. • When the bit rate is set to 50 Mbps (0 46) during slow motion recording, relay recording is not available. Pre-recording Mode When pre-recording mode is activated, the camcorder starts recording continuously into a temporary memory of approximately 3 seconds so when you press the START/STOP button, the clip will contain also approximately 3 seconds of video and audio recorded before you pressed the button. [J Other Functions] [Special Rec] [Off] 1 Open the [Special Rec] submenu. [J Other Functions] [Special Rec] 2 Select [Pre Rec] and then press SET. • [PRE REC STBY] appears at the top of the screen. 3 Press the START/STOP button to begin recording. • The tally lamps illuminate. • [PRE REC STBY] changes to [N PRE REC] while recording. 4 Press the START/STOP button again to stop recording. • The camcorder records the clip, including approximately 3 seconds of video and audio recorded before the START/STOP button was pressed. • The tally lamps go out and [PRE REC STBY] appears at the top of the screen.