Canon XF100 XF100 / XF105 Instruction Manual - Page 76
TC/UB Setup] - specifications
View all Canon XF100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
b Synchronizing with an External Device NOTES • The user bit of the time code signal is output while the camcorder is recording in mode or during playback of a clip in mode. When the [J Other Functions] [Frame Rate] setting is set to [24P] and 76 the [L TC/UB Setup] [User Bit] [Output Mode] setting is set to [Pulldown], the user bit will be 2:3 pulldown data. In other words, when a recording in 24P mode is output from the HD/SD SDI terminal, the signal is converted to 60i using the 2:3 pulldown method. An external device can receive the data used in this conversion (2:3 pulldown data) to convert the signal to 1080/24P specifications.
b
Synchronizing with an External Device
76
NOTES
•
The user bit of the time code signal is output while the camcorder is recording in
mode or during
playback of a clip in
mode. When the [
J
Other Functions]
[Frame Rate] setting is set to [24P] and
the [
L
TC/UB Setup]
[User Bit]
[Output Mode] setting is set to [Pulldown], the user bit will be 2:3
pulldown data. In other words, when a recording in 24P mode is output from the HD/SD SDI terminal, the
signal is converted to 60i using the 2:3 pulldown method. An external device can receive the data used in this
conversion (2:3 pulldown data) to convert the signal to 1080/24P specifications.