Canon XF100 XF100 / XF105 Instruction Manual - Page 72
Time Code] submenu.
View all Canon XF100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Setting the Time Code NOTES • When the [J Other Functions] [Frame Rate] setting is set to [24P], the frames value in the time code runs from 0 to 23. For other settings, it runs from 0 to 29. 72 • b When the [J Other Functions] [Frame Rate] setting is set to [24P], the frames value in the time code signal output from the HD/ SD SDI terminal or GENLOCK/TC terminal runs from 0 to 29. • When you are using interval recording, frame recording or slow & fast motion recording mode, you cannot select the [Free Run] option for the [Preset] running mode. Conversely, when you are using pre-recording mode, [Free Run] is automatically set and cannot be changed. • When you mix drop frame and non-drop frame time codes, there might be a discontinuity in the time code at the point where the recording starts. • As long as the built-in rechargeable lithium battery is charged and you selected the [Free Run] option, the time code continues to run even if you disconnect all other power sources. However, this is less accurate than when the camcorder is on. • If you set an assignable button to [Time Code] (0 97), you can press the button to open the [L TC/UB Setup] [Time Code] submenu.