Canon iP1700 Quick Start Guide - Page 61

The POWER Lamp green and ALARM Lamp orange Flashes Alternately

Page 61 highlights

Troubleshooting Number of Flashes Sixteen Flashes Possible Cause Try This The ink level cannot Possible causes are as follows: be correctly detected · This FINE Cartridge has previously been used. · Ink may have run out. The function for detecting the remaining ink level will be disabled since the remaining ink level cannot be correctly detected. If you want to continue printing without this function, press the RESUME/CANCEL button. Canon recommends to use new genuine Canon cartridges in order to obtain optimum quality. Note The POWER Lamp (green) and ALARM Lamp (orange) Flashes Alternately: Disconnect the printer cable from the printer, and then turn the printer off and then unplug the printer from the power supply for a while. Plug the printer back in and turn the printer back on. If the problem remains, contact the Customer Care Center. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

Troubleshooting
57
Sixteen Flashes
The ink level cannot
be correctly
detected
Possible causes are as follows:
· This FINE Cartridge has previously been used.
· Ink may have run out.
The function for detecting the remaining ink level will be disabled since the
remaining ink level cannot be correctly detected. If you want to continue printing
without this function, press the
RESUME/CANCEL
button.
Canon recommends to use new genuine Canon cartridges in order to obtain
optimum quality.
Note
The POWER Lamp (green) and ALARM Lamp (orange) Flashes Alternately:
Disconnect the printer cable from the printer, and then turn the printer off and
then unplug the printer from the power supply for a while. Plug the printer back
in and turn the printer back on.
If the problem remains, contact the Customer Care Center.
Number of
Flashes
Possible Cause
Try This