Canon imageCLASS MF4690 imageCLASS MF4690 Basic Operation Guide - Page 140
Enter the desired three-digit code 000 to 191 with the numeric keys., Press [Start]., TEL=0123X
View all Canon imageCLASS MF4690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Sending Documents 4 Enter the desired three-digit code (000 to 191) with the numeric keys. Ex. TEL=0123XXXXXX [*001]CANON If you entered a wrong code, press [Clear], then try again from step 3. If you want to adjust the image quality and density, see "Scan Settings," on p. 4-4. 5 Press [Start]. When you set the documents on the platen glass, press [ ] or [ ] to select the document size, then press [Start] for each document. When scanning is complete, press [OK] to start sending. When is set to in in in , and if you have specified the destination by any other method than using numeric keys, the machine starts scanning automatically without pressing [Start], after the preset time for this setting is elapsed. 4-43
4-43
Sending Documents
4
Enter the desired three-digit code (000 to 191) with the numeric keys.
TEL=0123XXXXXX
[*001]CANON
Ex.
If you entered a wrong code, press [Clear], then try again from step 3.
If you want to adjust the image quality and density, see “Scan Settings,” on p. 4-4.
5
Press [Start].
When you set the documents on the platen glass, press [
] or [
] to select the document size, then
press [Start] for each document. When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if
you have specified the destination by any other method than using numeric keys, the machine starts
scanning automatically without pressing [Start], after the preset time for this setting is elapsed.