Canon imageCLASS MF4690 imageCLASS MF4690 Basic Operation Guide - Page 242
Lift Panel To Open, Platen Glass Dirty
View all Canon imageCLASS MF4690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
Message PAPER JAM LIFT PANEL TO OPEN PHONE OFF HOOK HANG UP PHONE PLATEN GLASS DIRTY CLEAN PLATEN GLASS PREPARING SCANNER... PLEASE WAIT SAME FILE NAME START AGAIN STOP KEY PRESSED PRESS OK KEY Description Action Paper jams have occurred in the machine. or appears alternately. Clear the paper jam (See "Paper Jams," on p. 11-4.) and reload paper in the paper cassette or multipurpose tray. The cover must be opened and closed to resume the current job. The external telephone is off the hook. Hang up the external telephone. The ADF scanning area on the Clean the ADF scanning area, left side of the platen glass may then press [OK]. be dirty. The machine is not ready for scanning. Wait until the machine is ready. The same file name exists when Press [OK] and rename the file. you are scanning a document to a USB memory. A transmission error has occurred because the line condition was poor. Check the line condition, then try again. [Stop/Reset] has been pressed while scanning the document using the ADF. Press [OK], then set the document again. Troubleshooting 11-19