Canon imageCLASS MF4690 imageCLASS MF4690 Basic Operation Guide - Page 90
Use the numeric keys to enter the desired copy quantity 1 to 99., Press [Start]., combination copying.
![]() |
View all Canon imageCLASS MF4690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Copying 4 Use the numeric keys to enter the desired copy quantity (1 to 99). 5 Press [Start]. When you set the document on the platen glass, press [Start] for each document. When scanning is complete, press [OK]. - If you press [OK] without scanning the second document, only the first document will be printed on the left side of the paper. - A maximum of 1/8" (4 mm) margin will be produced between the two reduced documents in 2 on 1 combination copying. - To cancel all settings, press [Stop/Reset]. - When you switch the mode by pressing the mode keys such as [SEND/FAX], all settings will be also canceled. If you want to keep the settings as the default, see "Setting Menu," on p. 12-6. 3-13
![](/manual_guide/products/canon-imageclass-mf4690-imageclass-mf4690-basic-operation-guide-5a3e648/90.png)
3-13
Copying
4
Use the numeric keys to enter the desired copy quantity (1 to 99).
5
Press [Start].
When you set the document on the platen glass, press [Start] for each document. When scanning is
complete, press [OK].
If you press [OK] without scanning the second document, only the first document will be printed on
the left side of the paper.
A maximum of 1/8" (4 mm) margin will be produced between the two reduced documents in 2 on 1
combination copying.
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the mode keys such as [SEND/FAX], all settings will be also
canceled. If you want to keep the settings as the default, see “Setting Menu,” on p. 12-6.
–
–
–
–