Canon imageCLASS MF4690 imageCLASS MF4690 Basic Operation Guide - Page 247

Error Code #0403 #0406 #0703 #0705 #0752 Description Action The same file name exists when you are scanning a document to a USB memory. Press [OK] and rename the file. Some kind of error has occurred in Make sure that the USB memory is the machine when you are scanning inserted correctly to the machine, or a document to a USB memory (e.g., file system is supported. the USB memory is disconnected Press [OK] and try again. from the machine, or file system is not supported.). The memory for image data is full when sending documents. - Wait a few moments, and then try sending again after other send jobs are complete. - Erase documents stored in memory. If the machine still does not operate normally, turn the main power OFF, and then back ON. The send operation was interrupted because the size of the image data is larger than that specified in in in in . - Change the setting for in in in . - Select a lower resolution. - Set to in send settings. - Some kind of error occurred in the - Try sending again before checking machine when sending a color the network conditions or settings. e-mail. - The SMTP server name or POP server name for e-mail is not correct, or the server is not functioning. - Check the SMTP server name, domain name, POP server name, and e-mail address in in in . - The domain name or e-mail address may not be set. - Check that the SMTP server is operating properly. - The network is down. - Check the network status. Troubleshooting 11-24