Canon imageCLASS MF4690 imageCLASS MF4690 Basic Operation Guide - Page 142
Press the one-touch key or [Coded Dial] followed by the three-digit code under
View all Canon imageCLASS MF4690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Sending Documents 3 Press the one-touch key or [Coded Dial] followed by the three-digit code under which the desired address group is registered. If you pressed a wrong key or code, press [Clear], and perform step 3 again. If you want to adjust the image quality and density, see "Scan Settings," on p. 4-4. 4 Press [Start]. When you set the documents on the platen glass, press [ ] or [ ] to select the document size, then press [Start] for each document. When scanning is complete, press [OK] to start sending. When is set to in in in , and if you have specified the destination by any other method than using numeric keys, the machine starts scanning automatically without pressing [Start], after the preset time for this setting is elapsed. 4-45
4-45
Sending Documents
3
Press the one-touch key or [Coded Dial] followed by the three-digit code under
which the desired address group is registered.
If you pressed a wrong key or code, press [Clear], and perform step 3 again.
If you want to adjust the image quality and density, see “Scan Settings,” on p. 4-4.
4
Press [Start].
When you set the documents on the platen glass, press [
] or [
] to select the document
size, then press [Start] for each document. When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if
you have specified the destination by any other method than using numeric keys, the machine starts
scanning automatically without pressing [Start], after the preset time for this setting is elapsed.