Canon imageCLASS MF7480 imageCLASS MF7400 Series Reference Guide - Page 104

Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 6. Select the key containing the copy settings that you want to erase , then press [Next]. - Make sure to check the settings first before erasing them. - Keys that already have settings stored in them are displayed with a black square (˙) in the lower right corner of the key. - If you select a key that already has settings stored in it, the settings are displayed. - If there are more stored copy settings than are currently displayed, you can scroll through the list by pressing [˝] or [˛]. 7. Press [Yes]. The message appears for approximately two seconds on the touch panel display. The stored copy settings are erased. To cancel erasing the settings, press [No]. Key names are not erased. For instructions on changing a key name, see "Naming a Memory Key," on p. 3-31. 8. Press [Cancel]. 9. Press [Done]. When a memory key is not in use, as is the case when you delete its settings, [OK] is grayed out, and you must press [Cancel] → [Done] to complete the procedure. Table of Contents Index Back Previous Next TOP 3-33