Canon imageCLASS MF7480 imageCLASS MF7400 Series Reference Guide - Page 53

Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Loading Originals Place your originals on the platen glass or into the feeder, depending on the size and type of the original, and the scan modes that you want to use. ˔ Platen Glass Place the originals on the platen glass when scanning bound originals (such as books and magazines), heavyweight or lightweight originals, and transparencies. ˔ Feeder Place the originals into the feeder when you want to scan several originals at the same time, and press (Start). The machine automatically feeds the originals to the scanning area and scans them. Two-sided originals can also be automatically turned over and scanned as two-sided originals. ˙ Original Sizes The size of the original is automatically detected, and the document is scanned. If the output paper in the recipient's machine is not equal to the scanned size, the original image may be reduced in size or divided into smaller parts before it is sent. The machine cannot always detect the size of the original if it is a nonstandard paper size, such as a book. In this case, specify the size at which you want to scan the original. (See "Document Size," on p. 4-15.) Back Previous Next TOP ˙ Orientation You can place an original either vertically or horizontally. Always align the top edge of your original with the back edge of the platen glass (by the arrow in the top left corner) or the back edge of the feeder. Platen Glass Vertical Placement Horizontal Placement Feeder Vertical Placement Horizontal Placement Table of Contents Index 2-5