Canon imageFORMULA ScanFront 400 ScanFront 400 Setup and Operation Guide - Page 13
Power, Moving the Scanner, Handling, Model: MG1-5039
![]() |
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
❏ Power ● Connect only to a power outlet of the rated voltage and power supply frequency (either 120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your region). ● Do not connect other electrical equipment to the same power outlet to which the scanner is connected. Also, when using an extension cord, make sure that the extension cord is rated for the current requirements of the scanner. ● Never try to disassemble the AC adapter or modify it in any way, as this is extremely dangerous. ● The power cord and AC adapter may become damaged if they are often stepped on or if heavy objects are placed on them. Continued use of a damaged power cord and AC adapter can lead to an accident, such as a fire or electrical shock. ● Do not use the power cord while it is coiled. ● Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and remove it from the outlet. ● Keep the area around the power plug clear of objects so that the power cord can be disconnected easily in an emergency. ● Use only the AC adapter provided with this scanner. Also, do not use the AC adapter provided with the scanner with any other electrical devices. Model: MG1-5039 ● If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. ❏ Moving the Scanner ● When moving the scanner, always hold it with both hands to avoid dropping it. The weight of the scanner unit is approximately 9.92 lbs (4.5 kg). ● Before moving the scanner, make sure the document tray is closed and the interface cable and AC adapter are disconnected. If the scanner is transported with these items connected, the plugs and connectors may be damaged due to excessive force applied to them during movement. ❏ Handling WARNING Note the following precautions whenever using the scanner. Failure to do so may result in a fire or electric shock. ■ Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable substance near the scanner. ■ Do not cut, damage, or modify the power cord or AC adapter. Do not place heavy objects on the power cord or AC adapter, and do not pull or excessively bend the power cord. Chapter 1 Before Use 13
![](/manual_guide/products/canon-imageformula-scanfront-400-scanfront-400-setup-operation-guide-b7ff4c9/13.png)