Canon imageFORMULA ScanFront 400 ScanFront 400 Setup and Operation Guide - Page 29

Network Settings, Press [Administrator setting]., Press [OK] to display the [Administrator setting] - default password

Get Canon imageFORMULA ScanFront 400 PDF manuals and user guides View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

❏ Network Settings Follow the procedure below to confirm and configure the device name and IP address needed to connect the scanner to a network. IMPORTANT • The device name is the name used to identify the scanner on the network and is set to the 14 alphanumeric characters of the SF+MAC address by default. When changing this setting, make sure to select a unique name that is different from those of all other devices. • Under default settings, the IP address is assigned automatically by the DHCP server. When a DHCP server is not used, clear the [DHCP server Enable] check box, and enter a fixed address. For details, contact your network administrator. • The IP address is used for the URL when accessing the scanner from an external terminal's web browser. Be sure to write down the IP address in case you forget it. 1. Press [Administrator setting]. 2. Press [OK] to display the [Administrator setting] screen. No administrator password is set by default. 3. Press [Device Configuration]. The [Administrator Password] input box appears. Chapter 2 ScanFront Setup 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Chapter 2
ScanFront Setup
29
❏
Network Settings
Follow the procedure below to confirm and configure the
device name and IP address needed to connect the scanner
to a network.
IMPORTANT
•
The device name is the name used to identify the scanner on
the network and is set to the 14 alphanumeric characters of
the SF+MAC address by default. When changing this setting,
make sure to select a unique name that is different from those
of all other devices.
•
Under default settings, the IP address is assigned
automatically by the DHCP server. When a DHCP server is not
used, clear the [DHCP server Enable] check box, and enter a
fixed address. For details, contact your network administrator.
•
The IP address is used for the URL when accessing the
scanner from an external terminal's web browser. Be sure to
write down the IP address in case you forget it.
1.
Press [Administrator setting].
The [Administrator Password] input box appears.
2.
Press [OK] to display the [Administrator setting]
screen.
No administrator password is set by default.
3.
Press [Device Configuration].