Canon imageFORMULA ScanFront 400 ScanFront 400 Setup and Operation Guide - Page 45
Placing a Carrier Sheet for Passports
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
• The maximum thickness that can be scanned is 33.53 lb bond (0.00591" (127 g/m2 (0.15 mm))). If the thickness exceeds 33.53 lb bond (0.00591" (127 g/m2 (0.15 mm))), the scanner may break down due to problems such as paper jam. • Depending on the condition of the carrier sheet, the scanned image may be cut off and the scanner's correction functions may not operate properly. In such cases, specify a larger paper size (e.g., A4) in the [Page Size] setting. • The carrier sheet is a consumable item. Replace it as necessary, if there are visible scratches or smudges, for example. The general replacement cycle for the carrier sheet is about 1,000 scans involving a single sheet of 21 lb bond (80 g/m2) paper per scan. ❏ Placing a Carrier Sheet for Passports When scanning a passport, insert the passport into an optional carrier sheet for passports before placing it in the scanner. 1. Set [Document type] to [Carrier sheet (passport type)] in the Detailed Settings screen. (Refer to "Document type" on p. 94 of the ScanFront 400 INSTRUCTIONS.) 2. Open the page of the passport that you want to scan and insert it into the carrier sheet. 3. Place the document with the side you want to scan facing down. Adjust the document guides on both sides of the document after placing the document. CAUTION • If the carrier sheet and passport are not placed properly, paper jams may occur or the document may not be scanned properly. • When [Carrier sheet (passport type)] is selected, [Double feed detection by Ultrasonic] will be set to [OFF] automatically. Chapter 3 Handling 45