Canon imageFORMULA ScanFront 400 ScanFront 400 Setup and Operation Guide - Page 20
ScanFront Setup Overview, Turning the Power ON and OFF See p. 26
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ScanFront Setup Overview Follow the procedures below to set up the ScanFront 1. Checking the Supplied Accessories (See p. 21) Confirm that all of the supplied accessories are included. 2. Removing the Packing Materials (See p. 22) Remove the packing materials protecting the scanner. 3. Before Setup (See p. 24) Move the scanner to the desired installation site, and connect the AC adaptor and network cable. 4. Turning the Power ON and OFF (See p. 26) Use the power button to turn the scanner ON, and press [Power off] on the touch panel to turn it OFF. 5. ScanFront Setup (See p. 28) To set up the scanner, configure the administrator settings. This guide describes how to configure the network settings, how to set the date and time and confirm the time zone, and how to configure mail server settings for sending e-mail. For details on other settings, refer to the ScanFront 400 INSTRUCTIONS (electronic manual). * For a Web browser, use Microsoft Internet Explorer 6.0 or later or Firefox 3.5 or later. • Network Settings Configure the [Device Name] and [IP Address] settings needed to connect to the network. (See p. 29.) • Configuring the Date and Time and Confirming the Time Zone Set the date and time and confirm the time zone. (See p. 32.) • Mail Server Settings Configure the mail server to be used for sending e-mail. (See p. 34.) 20 Chapter 2 ScanFront Setup