Canon imageFORMULA ScanFront 400 ScanFront 400 Setup and Operation Guide - Page 36
Documents, Plain Paper
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1. Documents The ScanFront can scan documents in a range of sizes from business cards to A4/LTR. It is possible to feed documents of the following sizes and thicknesses depending on the feeding method used. ❏ Plain Paper Size Width: 1.97" to 8 1/2" (50 mm to 216 mm) Length: 2.13" to 14.02" (54 mm to 356 mm) (up to 120" (3,048 mm) in Long Document mode) Thickness for Page Separation ON 7.2 lb to 57 lb bond (27 g/m2 to 209 g/m2) Thickness for Page Separation OFF 7.2 lb to 68 lb bond (27 g/m2 to 255 g/m2) Loading capacity A4 size or smaller: 60 sheets (21 lb bond (80 g/m2)) Larger than A4 size: 40 sheets (21 lb bond (80 g/m2)) Make sure stacks do not exceed 10 mm in height (including curls) for either of the above. IMPORTANT A document must meet the following criteria to be scannable: • When scanning a multipage document, pages must be grouped together so that they have the same size, thickness, and weight. Scanning different types of paper at one time can cause the scanner to jam. • Always make sure that the ink on a document is dry before scanning it. Scanning documents with the ink still wet may soil the rollers or scanning glass, cause lines or smudges to appear on images, or dirty other documents. • Always clean the rollers or scanning glass after scanning a document written in pencil. Scanning documents with pencil written on them may soil the rollers or scanning glass, cause stripes to appear in images, or dirty other documents. • When scanning a two-sided document that is printed on thin paper, the image on the opposite side of each page may show through. Adjust the brightness in the scanning conditions before scanning the document. • When scanning thin paper documents, feed errors may occur depending on the paper type, and the documents may be scanned and ejected out of order. • Laminated documents may not be scanned correctly, depending on the document. • Note that scanning the following types of documents can cause a paper jam or malfunction. To scan such a document, scan a photocopy of the document or use an optional carrier sheet. Wrinkled or creased documents Carbon paper Curled documents Coated paper Torn documents Documents with paper clips or staples Extremely thin, translucent paper Documents with excessive paper particles 36 Chapter 3 Handling