Canon imageFORMULA ScanFront 400 ScanFront 400 Setup and Operation Guide - Page 42
Placing a Folded Document, Adjust the document guides to fit the width of the, document.
![]() |
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4. Adjust the document guides to fit the width of the document. IMPORTANT Make sure that document stacks placed in the feed tray do not exceed the document guides. Sizes Larger than A4/LTR: Less than 40 sheets (22 lb bond (80g/m2)). Make sure stacks do not exceed 10 mm in height (including curls). ❏ Placing a Folded Document Folio Scan enables you to scan documents that are larger than A4/LTR and therefore do not fit in the feeder. (The maximum size is 11" × 17"/A3.) To use the function, fold the document in half lengthwise and place it into the feeder. The ScanFront will scan both sides and combine the scanned images into a single image. Loading mark The number of sheets that you can place in the scanner at one time varies by paper size as follows. A4/LTR Size or Smaller: Less than 60 sheets (22 lb bond (80g/m2)). Make sure stacks do not exceed 10 mm in height (including curls). 42 Chapter 3 Handling IMPORTANT • When folding the document, align the right and left sides and create a sharp, straight fold. Otherwise the document may jam or the image may not be aligned properly. • The fold line itself will not be scanned. Keep this in mind if there is content such as photos, diagrams, or text that spans the fold.
![](/manual_guide/products/canon-imageformula-scanfront-400-scanfront-400-setup-operation-guide-b7ff4c9/42.png)