Canon imageFORMULA ScanFront 400 ScanFront 400 Setup and Operation Guide - Page 68
Press [Start] to start scanning., Check the document and go to the next step.
View all Canon imageFORMULA ScanFront 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
6. Press [Start] to start scanning. Scanning stops after the document has been scanned. 7. Check the document and go to the next step. IMPORTANT • If [Send the files immediately after scanning] is set to [ON] in Send Settings of the Scan / Send Settings screen, scanning ends without displaying the continue to scan confirmation screen, and the address confirmation screen of Step 10 appears. • When the confirmation message is left displayed and the scanner transitions to Low Power Mode, all of the data scanned up until that point is discarded. (Refer to "Adjust the wait time until the Low Power Mode." on p. 152 of the ScanFront 400 INSTRUCTIONS.) • Press [Complete] to go to the Send screen. • Press [Continue] to resume scanning. • Press [Cancel] to cancel the scanned images and return to the Scan / Send Settings screen. 8. Check the scanned images. 68 Chapter 4 Operating Procedures