Canon imagePROGRAF PRO-6100S series User Manual Win - Page 102
Open top cover and lift release lever.
![]() |
View all Canon imagePROGRAF PRO-6100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Note • If any paper has been advanced that will not be used, a message is shown requesting you to remove it. Follow the instructions on the screen to remove the paper, and redo the operation. 2. Open top cover and lift release lever. Important • Do not touch Linear Scale (A), carriage shaft (B), or Ink Tube Stabilizer (C). Touching these parts may damage them. 3. Place cut sheet with the print side up, insert in portrait orientation between platen (A) and paper retainer (B), and align paper's far edge using the following steps. 1. Load while aligning with right side paper alignment line (C). 2. Align far edge of inserted sheet with leading edge of paper alignment line (D) as shown. 102
![](/manual_guide/products/canon-imageprograf-pro6100s-series-user-manual-win-d4daf99/102.png)
Note
•
If any paper has been advanced that will not be used, a message is shown requesting you to
remove it.
Follow the instructions on the screen to remove the paper, and redo the operation.
2.
Open top cover and lift release lever.
Important
•
Do not touch Linear Scale (A), carriage shaft (B), or Ink Tube Stabilizer (C). Touching these parts
may damage them.
3.
Place cut sheet with the print side up, insert in portrait orientation between platen (A) and
paper retainer (B), and align paper's far edge using the following steps.
1.
Load while aligning with right side paper alignment line (C).
2.
Align far edge of inserted sheet with leading edge of paper alignment line (D) as shown.
102