Canon imagePROGRAF PRO-6100S series User Manual Win - Page 981

4922 Cause The Media Take-up Unit cannot roll the paper for one of the following reasons. • A paper jam has occurred and the roll cannot be rewound. • The Media Take-up Unit malfunctioned. What to Do • The take-up unit's permitted capacity is exceeded Remove paper from the take-up unit. Tap OK on the touch screen to dismiss the error. Note • You can wind the paper until the outer diameter of the wound paper is the same as the outer diameter of the paper core. • Paper is jammed or could not be rolled Remove the paper from the Media Take-up Unit. Tap OK on the touch screen to dismiss the error. Note • When printing on lightweight paper or without a border, the border of the paper may get wrinkled coming in contact with the roll holder, resulting in poor winding. If these problems occur when winding using a 2-inch core, remove the spacer held in place by 4 hex screws on the roll holder flange, and then wind. • Media Take-up Unit malfunction Contact your Canon dealer for assistance. Important • Printing will pause if there is a Media Take-up Unit error. If you do not want to printing to stop, set Skip errors during take-up to ON. However, note that this error may cause paper jams and affect the printing quality. 981