Canon imagePROGRAF PRO-6100S series User Manual Win - Page 190

◾ Timeout setting Specifies the timeout length. ◦ Bonjour settings Setting items when you use Bonjour. ◾ Enable/disable Bonjour Selecting Enable allows you to use Bonjour to perform the network settings. ◾ Service name Specifies the Bonjour service name. You can use up to 48 characters for the name. Note • You cannot use the same service name as that already used for other LAN connected devices. ◦ IEEE802.1X settings Performs various settings for IEEE802.1X. ◦ SNTP settings Performs various settings for SNTP (Simple Network Time Protocol). ◦ Spanning tree setting Enables/Disables spanning tree. Selecting Active avoids circulating data on a network. ◦ LPR protocol setting Enables/Disables the LPR setting. ◦ RAW protocol Enables/Disables RAW printing. ◦ LLMNR Specifies ON/OFF of LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the printer to detect printer's IP address from the printer name without a DNS server. ◦ Gigabit Ethernet settings Specifies the communication speed and communication method when using Gigabit Ethernet. ◦ Use Dedicated Port Selects whether to use a dedicated port for a command sent from a Canon application to the printer. Selecting ON allows you to use the dedicated port. ◦ IPP settings Selecting Enable allows you to print via the network with the IPP protocol. ◦ Wi-Fi DRX setting Selecting Enable allows you to activate discontinuous reception when using Wi-Fi. ◦ Wired LAN DRX setting Selecting Enable allows you to activate discontinuous reception when the printer is connected to a device compatible with wired LAN. 190