Canon imagePROGRAF PRO-6100S series User Manual Win - Page 198

◦ Roll paper setting 7 Select whether 600 mm or 24 in. is applied when a roll of an intermediate size is detected. • Adjust roll unit Select this setting item when you replace the roll unit. • Keep margin at cut sheet end When printing on the sheet, selecting Enable sets the trailing edge of the paper to 20 mm. Select Enable if printing on the trailing edge of the paper is disturbed. • Advanced paper settings Specifies advanced paper settings for each paper feed position. Note • You can select Extension for borderless printing as a setting item for some paper types. If you select Select extension amount for Paper with adequate width in Extension for borderless printing, the border may remain on the paper depending on the setting value. In this case, change the setting value, or perform Sample of extension amounts to check the value with no border and enter it. • If you select Sample of extension amounts, you can print out output samples by adjustment value and check the amount of extension when borderless. Check the edges (A) of the paper of No. 1 to No. 8 of the output pattern, and select the appropriate number for the amount of protrusion of the printed pattern. We recommend to clean the platen after printing the adjustment pattern. • Depending on the printing environment, the back of the paper may be soiled by the ink that has run out, even if the border is missing. • Print advanced paper settings Tapping Yes prints out each setting specified in Advanced paper settings. • Reset all detection priority data Resets estimated data for all learned paper when Auto detect or Auto with confirmation is selected in Media type selection method. • Reset paper settings for all paper Tapping Yes initializes each setting specified in Advanced paper settings. 198