Canon imagePROGRAF PRO-6100S series User Manual Win - Page 659

Between Scans The wait time until printing next scan can be set after printing one scan in page. Set in the event smudging occurs in the page, unevenness occurs in borderless printing, etc., and you would like to avoid this smudging and unevenness. Printer Default Settings in printer unit operation panel are applied. None Next scan will be print immediately after first scan is print. 0.5sec. / 1sec. / 3sec. / 5sec. / 7sec. / 9sec. Next scan will be print after the set amount of time has passed after printing one scan. * If smudges and/or unevenness occur, please increase time. Roll Paper Safety Margin In order for heavily curling paper to absorb well in platen, length of margin established on edge of paper can be selected. Near End Margin Roll Near End Margin length can be set. Printer Default Settings in printer unit operation panel are applied. 3mm Will be print in standard size. * Please select when there are no particular problems with printing. 20mm Please select when rubbing of the print heads occurs, such as when heavily curling paper is being used. Cut Speed Select auto-cut speed. This can be adjusted when paper cannot be cut precisely with auto-cut. Printer Default Settings in printer unit operation panel are applied. Fast Select when cut is not smooth with Standard settings. Standard Select when there are no particular problems with auto-cut. Slow If this is selected for paper with adhesive, the cutter will not stick to the adhesive easily and it will slow deterioration of the cutter's capabilities. Unidirectional Printing Controls color unevenness and unaligned ruled lines. Please check when printing in one direction. Calibration Value The results can be applied when printing in the event color calibration was set in printer unit. Please select Use Value when applying calibration. 659