Canon imagePROGRAF PRO-6100S series User Manual Win - Page 809
If firewall interferes with printer search
View all Canon imagePROGRAF PRO-6100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 809 highlights
9. Enter default gateway. 10. Select OK. The IPv4 address has been specified. • If you specify IPv6 address: 1. Select IPv6. 2. Select Yes on the displayed screen. 3. Select Enable/disable IPv6. 4. Select Enable. The IPv6 address has been specified. Important • If firewall is enabled on the computer, printers on a different subnet may not be detected. Disable firewall. If firewall interferes with printer search: • If a firewall message appears: If a firewall message appears warning that Canon software is attempting to access the network, set the security software to allow access. After allowing the software to access, specify the IP address or host name and search for printers again. If the printer is found, follow the instructions on the screen to continue to set up the network communication. • If no firewall message appears: Temporarily disable the firewall and specify the IP address or host name to search for printers again. After the setup is complete, re-enable the firewall. Note • For more on firewall settings of your operating system or security software, see instruction manual or contact its manufacturer. 809