Canon imagePROGRAF PRO-6100S series User Manual Win - Page 297
Performing/Changing Wi-Fi Settings
View all Canon imagePROGRAF PRO-6100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
Performing/Changing Wi-Fi Settings Follow the procedure below to perform/change Wi-Fi settings. Important • Enable Easy wireless connect (Cableless setup) before performing printer setup. (Not required if you change the IP address.) For details, search for "NR049" on your printer's online manual and see the page shown. • If you use a printer over the Wi-Fi, we highly recommend you perform security settings for Wi-Fi network using WPA/WPA2 from the viewpoint of security. Note • For some models, you can perform network setup for a USB connected printer using IJ Network Device Setup Utility. Select USB on Switch View under the View menu to display printers. 1. Start up IJ Network Device Setup Utility. 2. Check the displayed message and select Yes. 3. Select Printer Network Setup on the displayed screen. Detected printers are listed. 4. Select printer to perform/change settings from printer list. Select the printer with Wi-Fi displayed on Connection Method and Available or Requires Setup displayed on Status to perform settings. You can perform settings for a printer with Available or Requires Setup not displayed on Status via USB connection. To perform setup for a USB connected printer, select USB from the pulldown menu on the toolbar and select the printer to perform/change settings. 5. Select Network Settings... on Printer Settings menu. The Confirm Printer Password screen appears. For more on the password, refer to Administrator Password. Note • Clicking the icon allows you to perform/change settings. • If you select a USB connected printer on step 4 and the selected printer is compatible with wired LAN, the screen below appears after the Confirm Printer Password screen appears 297