Canon imagePROGRAF PRO-6100S series User Manual Win - Page 566

The current settings are displayed in the settings preview on the left side of the Page Setup tab. 5. Select the paper source For Paper Source, select the setting that matches your purpose. Important • The paper feed method will differ according to the paper or lower level (roll paper 2) settings, or roll unit option settings. 6. Select roll paper width If you selected a roll paper for Paper Source, set Roll Paper Width to the width of the roll paper loaded in the printer. 7. Set the other items Set the other items as necessary. 8. Complete the setup Click OK. When you print, the document is printed using oversize. Important • When printing to oversized paper sizes, use paper that has the following necessary margins added to the document size. • Cut sheet: 6 mm or more added to width and 23 mm or more added to height of document size • Roll paper: 6 mm or more added to width and 6 mm or more added to height of document size Note • An oversized paper size cannot be used for the largest paper size that can be loaded in the printer. 566