Canon imagePROGRAF PRO-6100S series User Manual Win - Page 349

Automatic Adjustment to Straighten Lines and Colors If printed vertical lines are warped or colors are out of alignment, execute Print head alignment and adjust the print head position. Choose from Auto (standard) or Auto (advanced) for automatically adjusting the print head. Minor warping and misaligned colors can usually be improved by executing Auto (standard). If there is no improvement, perform Auto (advanced) or Manual. Manual Adjustment to Straighten Lines and Colors When you execute Auto (standard) or Auto (advanced), the adjustment pattern is printed, and the print head position is adjusted based on the printing result automatically. Important • Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type of paper as you will use for printing. • This function is not available with Tracing Paper, Translucent Matte Film, or Clear Film. Note • After print head replacement, we recommend executing Print head alignment. When Print pattern after new head is set to ON, print head position adjustment is automatically executed after print head replacement. • To change the paper type or for more beautiful color borders, perform Auto (standard). • To ensure clear quality and when replacing the print head, perform Auto (advanced) to fine-tune the position between nozzles and colors. To ensure high-quality printing, we recommend that you execute Auto (advanced). • If adjustment is not possible as expected using special paper, try another type of paper or try Manual adjustment. Manual Adjustment to Straighten Lines and Colors Paper to Prepare When using rolls An unused roll at least 10.00 in. (254.0 mm) wide When using sheets Auto (standard): Three sheets of unused paper, A4/Letter size or larger (or one sheet when using A2 or larger) Auto (advanced): Five sheets of unused paper, A4/Letter size or larger (or one sheet when using A2 or larger) Perform adjustment as follows. 349