Canon imagePROGRAF PRO-6100S series User Manual Win - Page 290
D: IP Address
View all Canon imagePROGRAF PRO-6100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
Appears after performing network setup and clicking Set to close the window. • Requires Setup Indicates the printer is required to perform Wi-Fi setup. Performing/Changing Wi-Fi Settings • Not Set Indicates the printer cannot be used on network, or IPv6 is disabled. Specify an IP address or enable IPv6 on Network Settings.... Performing/Changing Wi-Fi Settings • IP Address Overlap Indicates the IP address is duplicated to another printer. • Unknown Indicates the printer recognized as Available in the past cannot be used currently. Note • If USB is selected from the pulldown menu on the toolbar, nothing is displayed. D: IP Address Displays the printer IP address. Nothing is displayed if the printer status is Requires Setup. Note • If USB is selected from the pulldown menu on the toolbar, "-" is displayed. E: Location Displays the printer location if it is registered. Nothing is displayed if the printer status is Requires Setup. Note • If USB is selected from the pulldown menu on the toolbar, nothing is displayed. Assigning Printer Information F: Connection Method Displays printer connection method (wired LAN, Wi-Fi, or USB). Note • If USB is selected from the pulldown menu on the toolbar, USB is displayed. • If the printer supports both of the LAN connection methods, the printer is recognized as two printers and they are displayed separately. (The same numbers are displayed on Serial Number (Last 5 Digits).) • If the printer does not support wired LAN, wired LAN is not displayed. • If you are using IJ Network Device Setup Utility on the computer which does not support Wi-Fi, Wi-Fi is not displayed. G: Setting Method Displays printer setting method. • Auto 290