Canon imagePROGRAF PRO-6100S series User Manual Win - Page 522

Condi- Is the width of paper roll 1 different from the tion 7 width of paper roll 2? within the width of either paper roll 1 or paper roll 2 The width of the paper size speci- fied for the print job fits within the width of both paper roll 1 and pa- To Condition 7 per roll 2 Roll width is different Select the paper roll whose width is closer to the width specified for the print job Roll width is the same Select the paper roll currently being fed into the platen *1 *1 In the following cases, neither roll 1 nor roll 2 are being fed onto the platen. In such cases, paper roll 1 is selected. • When the printer has switched to sleep mode and has returned to the initial position • When the printer has been turned on • When cut paper has been fed into the printer and has exited it If the Detect paper setting mismatch setting is set on Display warning or Do not detect Condition Situation Judgment result Only one of either paper roll 1 or paper roll 2 is long enough Select the paper roll of sufficient length Condition 1 Neither paper roll 1 nor paper roll Whether the paper roll loaded on the printer is 2 are long enough long enough to print the paper size specified for Both paper roll 1 and paper roll 2 the print job. are long enough Error On the Printer's menu, Manage remaining roll amount is set on Disable (length of the paper roll cannot be determined) To Condition 2 Condition 2 Whether the paper roll loaded on the printer matches the paper type specified for the print job. Only one of either paper roll 1 or paper roll 2 matches the paper type Select the paper roll matching the paper type Neither roll 1 nor roll 2 match the paper type To Condition 3 522